Estimating Potential Climate Change Effects on the Upper Neuse Watershed Water Balance Using the SWAT Model

Climate change poses water resource challenges for many already water stressed watersheds throughout the world. One such watershed is the Upper Neuse Watershed in North Carolina, which serves as a water source for the large and growing Research Triangle Park region. The aim of this study was to quantify possible changes in the watershed’s water balance due to climate change. To do this, we used the Soil and Water Assessment Tool (SWAT) model forced with different climate scenarios for baseline, mid‐century, and end‐century time periods using five different downscaled General Circulation Models. Before running these scenarios, the SWAT model was calibrated and validated using daily streamflow records within the watershed. The study results suggest that, even under a mitigation scenario, precipitation will increase by 7.7% from the baseline to mid‐century time period and by 9.8% between the baseline and end‐century time period. Over the same periods, evapotranspiration (ET) would decrease by 5.5 and 7.6%, water yield would increase by 25.1% and 33.2%, and soil water would increase by 1.4% and 1.9%. Perhaps most importantly, the model results show, under a high emission scenario, large seasonal differences with ET estimated to decrease by up to 42% and water yield to increase by up to 157% in late summer and fall. Planning for the wetter predicted future and corresponding seasonal changes will be critical for mitigating the impacts of climate change on water resources.     

Rainfall Interception Based on Indirect Methods: A Case Study in Temperate Forests in Oaxaca,Mexico

Rainfall interception represents the amount of water trapped in natural cover that is not drained directly to the ground. Intercepted rainfall may evaporate after a rain event, making it one of the main drivers of water balance and hydrologic regionalization. This process can be affected by factors such as climate, altitude, vegetation type, and topography. Here is a simple method of calculating rainfall interception in temperate forests using in Santa Maria Yavesia, Oaxaca, and Mexico as an illustrative study area. We used two rain gauges to measure net precipitation (N_p) under the canopy at each study site and one gauge outside the canopy to obtain gross precipitation (G_p). Throughfall (T_h) was indirectly measured using hemispherical photographs. Rainfall interception was obtained through a combination T_h and G_p and N_p. The mean rainfall interception was 50.6% in the Abies forests, 23%–40% in the coniferous‐mixed forests, and 27.4% in the broad‐leaved forests. We classified rainfall events by intensity to determine the effect of canopy structure and precipitation and found that 75% of the events were weak events, 24% were moderate events, and 1% were strong events. In addition, we found that rainfall interception was lower when the intensity of precipitation was higher. Our method can be replicated in different ecosystems worldwide as a tool for assessing the influence of rainfall interception in terms of ecological services.     

Heat dissipation characteristic in the intake grille and radiator of a fuel cell vehicle

ABSTRACT

In this study, a three-dimension (3D) computational model was proposed to investigate the flow and heat transfer characteristics of the intake grilles of two different fuel cell vehicles. The models of the intake grilles were constructed according to the actual sizes of two vehicles, namely, Roewe 950 and Toyota Mirai, considering the heat dissipation unit to simplify the heat transfer model of the vehicle. The results showed that relative to Roewe 950, Mirai intake air flow rate was approximately 10% higher, the heat transfer capacity was approximately 7% higher, and the intake grille area was larger. The coolant outlet temperature of Mirai was lower than that of Roewe 950, which was beneficial for the long term and stable operation of a fuel cell. This comparative study provided guidance for the intake grille and radiator design of fuel cell vehicles. The only difference between fuel cell vehicles on the market and conventional vehicles was that in the former, the internal combustion engine was replaced with a fuel cell stack, which had insufficient heat transfer capacity because of the reducing temperature difference. Increasing the intake grille area and the heat exchange capacity of the radiator were the key issues for the development of fuel cell vehicles. In this study, an optimal window opening angle of the radiator fin of 23° provided a maximal heat transfer coefficient.     

我国区域空气污染治理效率及其影响机制——基于超效率SBM模型和门槛回归模型

随着人民对美好生活需求的日益增长,政府空气污染治理的效率问题日益得到重视。本文从地方政府空气污染治理效率及其影响因素的视角入手,以全国30个省份为研究对象,运用超效率SBM模型测算2003—2015年各省级区域的空气污染治理效率。在此基础上,运用门槛回归模型分析政府空气污染治理效率的影响机制。研究表明:①地区间空气污染治理效率差异性较为显著。中部、西部空气污染治理效率整体呈下降趋势。东部和东北地区空气污染治理效率则上升比较平稳。②政策规划、碳源、污染物排放和环境治理投入表现出双重门槛特征,其中碳源对空气污染治理效率影响显著,而以碳为首的能源消费结构则主要对中部和西部空气污染治理效率产生影响。落后地区政府应注重产业升级,财政上应对碳税等税目进行征收,产业上应鼓励企业创新,并对落后企业进行倒逼升级。     

温室气体和空气污染物协同治理研究展望

温室气体和空气污染物的协同治理是一种双赢的策略。自协同效应的概念提出以来,大量研究对温室气体和大气污染之间的协同减排技术、措施、潜力等方面进行了评估。本研究回顾了协同治理理论的发展历程、典型案例以及重要的政策实践,在此基础上讨论了当前研究与实践的特点,并对未来研究提出了建议。典型案例涉及能源、交通、工业和居民部门,政策实践讨论了温室气体和空气污染协同治理政策的主要类型及其实施情况。从损失评估、协同机理、高精度排放清单及模拟等角度对未来促进协同治理的研究提出了方向建议。     

生活垃圾强制分类形势下的多源废荧光灯管回收管理机制建议

废荧光灯管的来源广泛，包括工业来源和社会来源，社会来源又包括居民来源，企业事业单位、公共场所等机构来源，具有多来源的特性。废荧光灯管中含有汞，若不经过妥善处理，会造成环境污染，对人的身体健康造成危害。随着国内生活垃圾分类的开展，废荧光灯管作为生活垃圾中有害垃圾的典型类别被强制分类，但仍存在很多问题。本文梳理了我国废荧光灯管的产生情况、LED灯替代情况，并对美国、欧盟、日本和我国国内典型城市的废荧光管理情况进行了总结。针对我国废荧光灯管的回收现状，从责任主体、责任划分、收集渠道、资金机制等角度提出了相关的管理建议，为推动我国废荧光灯管的管理提供借鉴。     

磷酸改性生物炭-LDHs(Mg-Al-NO3)复合材料对双酚A的吸附

本研究选取油菜秸秆为原料,在600℃下热解得到生物炭和磷酸改性生物炭,并用共沉淀法制备3种改性生物炭-LDHs(Mg-Al-NO_3)复合材料.采用批量吸附法研究不同pH、吸附时间和不同生物炭/LDHs配比条件下复合材料对双酚A的吸附特性,借助XRD、FTIR和BET等测试手段探究了复合材料吸附双酚A的机制.结果表明,改性生物炭-LDHs(Mg-Al-NO_3)复合材料吸附双酚A的吸附平衡时间为4 h,符合准二级动力学方程(R~20.99);复合材料对双酚A的吸附效果稍逊于改性生物炭,改性生物炭在复合材料中所占比重越大,吸附效果越好.当pH值在5.0—9.0范围内变化时,改性生物炭-LDHs(Mg-Al-NO_3)复合材料对双酚A的吸附量呈下降趋势,且在pH=9.0时达到最小值.等温吸附模型数据表明,复合材料用Freundlich等温吸附模型效果更好.通过XRD、BET、FTIR测试研究发现,由于LDHs占据了生物炭表面的活性位点,致使生物炭与双酚A之间的相互作用减弱,降低了复合物的吸附能力.本研究结果初步阐释了改性生物炭-LDHs(Mg-Al-NO_3)复合材料吸附双酚A的机理,为生物炭-LDHs复合材料处理水体中有机污染物的应用提供了借鉴和参考.     

"热水洗+臭氧氧化"联合工艺处理大颗粒油基岩屑

针对油基岩屑处理过程中的大颗粒部分(0.5—1 cm),研究了以"热水洗+臭氧氧化"为核心的联合工艺的处理效果,并分别对热水洗、臭氧氧化环节的工艺参数进行了优化.结果表明,在最优条件下,经过处理后的油基岩屑的含油率可由15.8%降低到0.24%,达到了GB 4284-2018中规定的处置要求,处理过程中回收的油分可重新用于配制钻井液.通过对油基岩屑固相的表征发现,其具备臭氧催化氧化催化剂的明显特征,是一种天然的臭氧催化氧化催化剂,并从反应动力学角度对臭氧氧化环节的反应特性进行了定量分析.结果表明,其满足准一级反应动力学特征,反应活化能为14.421 kJ·mol~(-1).以"热水洗+臭氧氧化"为核心的联合工艺为大颗粒油基岩屑的无害化、资源化处理提供了一种参考.     

UiO-66(Zr)@多孔陶瓷复合材料的制备及对络合态重金属EDTA-Cu(Ⅱ)的去除

本文采用多孔陶瓷作为基体制备了锆基金属有机骨架UiO-66@多孔陶瓷复合材料.通过扫描电子显微镜(SEM)、粉末X射线衍射(PXRD)、氮气吸附和傅里叶变换红外光谱(FTIR)等表征手段对比了氢氧化钠脱硅和乙二胺表面改性等基体活化方式对UiO-66(Zr)在多孔陶瓷表面负载情况的影响.结果表明,经过乙二胺表面改性的多孔陶瓷对UiO-66(Zr)的负载更均匀,负载效果更好.以EDTA-Cu(Ⅱ)为考察对象,研究了UiO-66(Zr)@乙二胺表面改性多孔陶瓷复合材料对络合态重金属的净化效能.结果表明,UiO-66(Zr)@多孔陶瓷复合材料在较宽的酸碱条件下(pH=3—9)对络合态重金属EDTA-Cu(Ⅱ)均表现出良好的吸附性能,饱和吸附量为1.17 mg·g~(-1),并可通过NaOH解吸再生,从而实现材料的重复利用.     

液液萃取-固相萃取-气质联用测定指甲中的多溴联苯醚与多氯联苯

利用液液萃取(LLE)与固相萃取法(SPE)提取和净化人体指甲中的多溴联苯醚(PBDEs)和多氯联苯(PCBs),经浓硫酸除脂后,利用气相色谱-质谱联用仪(GC-MS)测定PBDEs和PCBs.对提取溶剂比例、净化柱类型(复合硅胶柱与固相萃取柱)、固相萃取条件(洗脱溶剂及体积)以及脂肪的去除方法进行了优化,加标回收率较前人基础上均有明显提高.加标回收试验结果显示,PBDEs和PCBs平均基质加标回收率分别为90%—110%和71%—102%,空白加标回收率分别为70%—110%和60%—100%之间,仪器检出限(IDL)分别为0.034—0.120μg·L~(-1)和0.032—0.392μg·L~(-1).本方法快速、简单、高效,能够满足指甲中PBDEs和PCBs的分析.同时本研究利用该方法对电子垃圾拆解地区居民的指甲样品进行测定,PBDEs和PCBs平均浓度分别为623 ng·g~(-1)和148 ng·g~(-1),BDE(-154、-153、-183、-209)和PCB(-8、-28、-52、-66、-101、-77、-118、-153、-187)在所有样品中均检出,女性指甲中PBDEs与PCBs的浓度普遍高于男性.